服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新太阳城_新太阳城直营官网-欢迎您-新太阳城有限公司>电动扭剪扳手是一种终紧扭剪型高强度螺栓的工具

电动扭剪扳手是一种终紧扭剪型高强度螺栓的工具

来源:http://www.no2design.com 日期:2022-03-30 发布人:wanzhong

电动扭剪扳手顾名思义就是扭剪梅花头螺栓拧紧作业的工具,帮助您装、拆螺拴、螺母,同时能比较准确地控制拧紧扭矩。利用螺栓定扭矩,当扳手达到一定扭矩时即可剪断螺栓的梅花头部分,其扭矩精度和轴向拉力是靠螺栓的定扭矩V型切口来保证的。拆装扭力矩大、比手工更保险可靠。方便、美观、实用、便于随车携带。广泛用于钢结构桥梁、厂房、发电设备等设施的施工作业。

As the name suggests, the electric torsion shear wrench is a tool for twisting and shearing the Torx head bolts. It helps you install and remove bolts and nuts, and can accurately control the tightening torque at the same time. The fixed torque of the bolt is used. When the wrench reaches a certain torque, the plum blossom head of the bolt can be cut off. Its torque accuracy and axial tension are guaranteed by the fixed torque V-notch of the bolt. The disassembly torque is large, which is safer and more reliable than manual. Convenient, beautiful, practical and easy to carry with the car. It is widely used in the construction of steel structure bridges, plants, power generation equipment and other facilities.
电动扳手的特点:(1)使用寿命长(2)手柄和机壳材料散热性好(3)功率大(4)耐撞击性强(5)手使用性价比
Features of electric wrench: (1) long service life (2) good heat dissipation of handle and casing materials (3) high power (4) strong impact resistance (5) cost performance of hand use
电动扭剪扳手是一种终紧扭剪型高强度螺栓的工具,一般有电动扭剪扳手和手动扭剪扳手,其中电动扭剪扳手比较常见。
Electric torsional shear wrench is a tool for final tightening torsional shear type high-strength bolts. Generally, there are electric torsional shear wrench and manual torsional shear wrench, among which electric torsional shear wrench is more common.
扭剪扳手的应用:扭剪型高强螺栓的初紧可使用冲击电动扳手或定扭矩扳手,而终紧需要使用扭剪扳手,所以扭剪扳手是专门终紧扭剪型高强螺栓的。
Application of torsional shear wrench: impact electric wrench or constant torque wrench can be used for initial tightening of torsional shear high-strength bolts, while torsional shear wrench is required for final tightening, so torsional shear wrench is specially used for final tightening of torsional shear high-strength bolts.
扭剪扳手的使用:扭剪扳手主要是终紧扭剪型高强螺栓的,它的目的就是把扭剪型高强螺栓的梅花头打断即可。工作时将扳手头对准螺栓头,扣动开关即可开始工作,几秒后,螺栓梅花头将被扭断,然后抽出扳手扣动扳机将梅花头弹出,即结束工作。
Use of torsion shear wrench: the torsion shear wrench is mainly used to finally tighten the torsion shear high-strength bolt. Its purpose is to break the plum blossom head of the torsion shear high-strength bolt. When working, align the wrench head with the bolt head and pull the switch to start working. After a few seconds, the bolt plum blossom head will be broken, and then pull out the wrench and pull the trigger to eject the plum blossom head, which is the end of the work.
扭剪扳手的特点:操作方便、省时省力。
The characteristics of torsion shear wrench: convenient operation, time-saving and labor-saving.